Boynton Beach, FL - Boca Bearings released a new and expanded One Way Bearing series. One Way Bearings have a small radial section height and are also commonly known as Anti-Reverse Bearings. This design uses the same small radial section as drawn cup needle roller bearings which make better use of reduced space. One Way Bearings are compact, lightweight, operate directly on a shaft and are also suitable for transmitting high torque. These bearings are designed to transmit torque between the shaft and housing in one direction and allow free motion in the opposite direction. One Way Bearings with and without bearing assemblies are offered both in an inch and metric series. One Way Bearings without bearing assemblies are available in HF, FC and RC versions. One Way Bearings with bearing assemblies are available in HFL, FCB and RCB series. The HFL series has two integral radial bearings arranged on both sides of a needle roller clutch. They can therefore support radial forces in particularly tight or small areas. Plastic springs (HFL...KF) are available for some sizes. Partially knurled outer rings (HFL...R) are also available upon request. The clutch and bearing assembly can be used in a temperature range from -30 degrees C to 120 degrees C. For a working environment above 70 degreesC, oil lubrication is recommended.
For more information, please visit www.bocabearings.com.
