Products
The Lead
Flexible Cotton Fiber Finishing Wheels
May 24, 2013 | by Rex-Cut Abrasives | Comments
Rex-Cut Type 27 Max Flex Cotton Fiber Wheels are flexible for blending and finishing flat and contoured surfaces in one step and do not need a back up pad.
GAM Gear Introduces 2013 GAM Catalog
May 24, 2013 9:55 am | by GAM Gear | Comments
For the first time ever, all of GAM’s product groups can be found in a single 102 page...
Disston Introduces Wood Boring Bits
May 22, 2013 4:51 pm | by Disston Tools | Comments
The expansion of Disston’s product line—with both Blu-Mol and Blu-Mol Xtreme branded product--...
Retaining Ring Pliers
May 22, 2013 9:21 am | by KNIPEX | Comments
Designed with high-quality materials, the broad offering of KNIPEX Retaining Ring Pliers fits...
Unvented Class E Safety Helmet
May 22, 2013 4:58 pm | by Gateway SafetySerpent comes in 11 shell colors, including Hi-Viz Orange and Hi-Viz Limon (somewhere right in between lemon and lime; shown at right), both independently tested to the ANSI standard for high visibility.
BoltHold Anchors Withstand Up To 2500 Lbs.
May 22, 2013 9:18 am | by Asphalt Anchors GroupBoltHold Anchors permit the removal of structures or equipment mounted on them and are flush to the ground, posing no threats to pedestrians.
Infinity Series Mining Air Winch
May 21, 2013 10:00 am | by Ingersoll RandThe new FA2i Infinity Series mining air winch has a rated capacity of 4,400 pounds (2,000 kg) with a 4,400-pound top layer rated line pull.
Tough New Electric Rider Lift Truck Series
May 21, 2013 9:56 amThe upgraded 8,000 to 12,000 lbs. capacity lift truck series features new enhancements to deliver better performance, reliability and durability in electric lift truck applications, says the company . . .
VOC-Free Liquid Flux
May 20, 2013 9:37 am | by AIMNC277 provides a broad activation range, proving to be an excellent flux for a variety of process parameters and applications, including lead-free wave soldering with tin-silver-copper, tin-silver, tin-copper, and other alloys.
Belt Drive Actuators From Misumi
May 20, 2013 9:34 am | by MisumiDesigned to optimize performance and reliability at a modest cost, the MSA Series Actuators can be configured to carry loads up to 227 kg (500 lbs), with travel speeds ranging from 1200 to 10,000 mm/sec, and standard lengths up to 6.25 meters.
Adjustable Bungee
May 17, 2013 9:26 am | by BihlerFlexThe new Versa Strap, 6-in-1 Adjustable Bungee is 36-inches long and contains six openings that allow the cord to expand and contract to meet the desired length of the end user.
Industrial Strength Cleaner & Degreaser
May 17, 2013 9:21 amThis degreaser is specially formulated for the most challenging machinery and equipment maintenance applications, says the company . . .
Quiet Clean Professional Vacuums
May 16, 2013 10:18 am | by SanitaireDeveloped so that cleaning professionals can work unobtrusively during daytime hours, the Quiet Clean line operates at less than 68 dB, allowing for vacuuming to occur 24/7 without disturbing tenants or guests.
Fully Insulated Hand Tools
May 16, 2013 10:09 am | by C. H. HansonNylon-11 insulation is proven to be more durable for safer operation than other insulation methods. Every tool meets or exceeds International Electrotechnical Commission (IEC) standards IEC60900 and ASTM F1505.
Thru-Hole 1/2” Drive Air Ratchet Set
May 10, 2013 4:43 pm | by King Tony AmericaThe innovative kit allows bolts up to a 1/2” thick to pass through. Plus the NE-0413 is available in SAE and Metric sizes.
Starter Kit For Distribution Operations Processing
May 10, 2013 4:37 pmIt is designed for warehouse and distribution operations that process between as little as 2,000 orders per day, or approximately 44,000 units per week.
Atlas Copco Creates Tech Support Competency Group
May 10, 2013 3:33 pm | by Atlas CopcoWhile dedicated technical support liaisons will continue to assist with regional-focused customer activities such as site visits, the new group will expand the current customer service model to include high-level technical support and product knowledge.
Euro Drawers Shelving Systems
May 10, 2013 3:25 pm | by Quantum StorageChoose from a selection of bin and shelving sizes and bin colors of blue, yellow, gray, or red. Color coded products are the perfect solution to simplify order picking and inventory control.
Straight-Handled Gauge Nibbler
May 10, 2013 2:27 pm | by Kett Tool CompanyThe KL‐2020 14 gauge nibbler from Kett Tool Company cuts 14 gauge C. R. mild steel and most grades of stainless to 16 gauge.
AutoCrib Unveils Automated Inventory With Object Recognition
May 10, 2013 2:20 pm | by AutoCribThe new VisiCab toolbox actually ‘sees’ which items are in it and which are missing, making it an exceptional answer for Foreign Object Debris (F.O.D.) control, says the company . . .
Angle Grinders With Slim Motor Housings
May 9, 2013 5:21 pm | by MetaboThe W720 and W820 are ideal for use in the repair, maintenance and metalworking industries, says Metabo . . .
Snap-On Launches Tool Tour
May 9, 2013 5:15 pm | by Snap-On Industrial BrandsSnap-on is making a major push into the oil and natural gas markets by showcasing its tools, equipment and capabilities at a number of National Oilwell Varco (NOV) Wilson distribution locations in Louisiana, Texas and Oklahoma as part of its Industrial Tools Tour.
Fastback II Utility Knife Features Magnetic Blade Storage
May 9, 2013 10:21 am | by Milwaukee ToolThe new magnetic blade storage will hold one spare blade at a time to keep the profile of the blade as slim as possible.
High-Temp Electrically Conductive Coating
May 9, 2013 10:15 amPyro-Duct 597-C is an advanced high temperature coating formulated using a high purity silver flake with a D50 particle size of less than 20 microns.
