The Titen HD self-undercutting anchor is targeted for high-strength applications where edge distances and spacing conditions are critical. Serrated teeth on the underside of the hex washer head help prevent the anchor from loosening. Undercutting threads along the entire length of the anchor transfer the load to the base material. Integral hex washer head requires no separate washer for a clean installed appearance. Simpson Strong-Tie Co., Inc. Enter 126

The Trak-It Model Ti-C gas-fired fastening system offers a latch on the nosepiece that enables the operator to clear misfeeds without having to remove the handle. A 42-pin magazine capacity reduces the time spent loading on the job, and it can accommodate pins up to 11/2 in. The tool's speed and convenience make it ideal for high-volume, repetitive firing applications. Powers Fasteners, Inc. Enter 127

Security construction fasteners in tamper-resistant TORX drive include the Secure-Bolt Sleeve Anchor for medium-duty applications, Secure Wedge-Bolt for heavy-duty applications, and TAPCON masonry anchors for light- duty applications. Tanner Bolt & Nut Corp. Enter 128

The Keyed-lok Screw features a lock "keyway" forged into a head screw, giving users a private or exclusive fastener. Materials available include stainless steel and alloy steel. Screw sizes range from 2.5mm to 14mm in truss head or flat head. Applications include control panels, transformers, bridges, tunnels, utility lines, meters, manhole covers, and other areas that require protection from theft or vandalism. Bryce Fastener Mfg., Inc. Enter 129

The one-piece HangerMate anchor has been revamped to simplify installation. In wood or concrete, all sizes of HangerMate can be installed with a single size drive socket. For concrete applications, all anchors utilize an ANSI-dimensioned ¼ in. masonry bit, and can be driven with the HangerMate drive sleeve or the same drive socket as the wood or steel anchors. Textron Fastening Systems Enter 130

Thread repair inserts for metal are now available with internal thread sizes from 4-40 to 1-8. Fine thread inserts can be furnished with internal thread sizes from 10-32 through 1-14. Self-locking external threads with factory-applied Loctite keep the inserts from backing out or vibrating loose. E-Z Lok Enter 131

For product information, visit inddist.com/info and enter the product number.