HDL seal is designed to solve problems associated with sealing bearings on large rolling mills that produce products such as paper and primary metals; provides superior seal performance while compensating for common factors such as roll defection, shaft misalignment and run-out; prevents loss of lubricant and particle contamination; rubber main lip element is bonded to the metal case. Chicago Rawhide WRITE IN NO. 204

Laser microgage and azimuth transit plate offer precision leveling and alignment to 0.001 in. over 50 ft; ideal for machinery installation, aligning rollers and guides, adjusting machine tools; transmitter projects laser reference beam; for straightness, flatness and parallelism; tripod mount or bolt to framework. Pinpoint Laser Systems WRITE IN NO. 205

Winter liners worn under hats protect from cold and wind on the job; back reflective strip and suspension straps; 2 pockets standard for available warming packs; elastic forehead strap, hook and loop closures; sherpa, fleece, all-purpose cotton outer and all-purpose nylon outer available, all in several lengths. Allegro Industries WRITE IN NO. 206

Rescor^™ 740 liquid foam forms lightweight, high-strength, machinable, thermally and electrically insulating parts usable up to 2,300°F; mix and pour into non-absorbent mold to harden overnight for high-strength, corrosion-resistant parts; low-cost alternative for heating element supports, hot pressing dies, processing boats, heat shields, fixtures, induction heating, Thermal and electrical insulators, etc.; resists most chemicals and solvents. Cotronics Corp. WRITE IN NO. 207

Series 500HP/506HP carbon steel ball valves; sizes from 1/4 -2 in.; pressure rated up to 6,000 psi; working temperatures from 0-150°F; round or square bodies with hex shaped ports for easy installation; internal design features nitrile o-rings and Delrin™ seats with molybdenum disulphide; lower actuation torque increases high-duty life cycle expectancy; all sizes are fully ported for unrestricted bore and minimum flow restriction; NPT or SAE straight thread female/female configurations. Parker Hannifin Corp. WRITE IN NO. 212

Chuck-Change™ system offers greater rigidity, accuracy and reduces set-up time for small lots; designed for multiple work-holding changeovers; allows chuck changes in minutes; mounts on most machine spindles; system receiver with drawtube becomes integral part of spindle; for lathes, grinders, gear hobs, more; 6- and 8-in. receivers stocked standard. Positrol, Inc. WRITE IN NO. 213

Magnetic clamping mold and die change system for high temperature applications is ideal up to 464°F; for molding rubber, ceramic, elastomers; optional heating system available; safety bars and latches available for vertical applications; can be designed for heating rods or heated fluid. EAS Walker WRITE IN NO. 214

ET134 temperature/pressure regulators have cascade control that eliminates wide temperature fluctuations by preventing spikes in pressure caused by changes in process load; regulator is reset by temperature changes; uses vapor tension thermostat to prevent ambient conditions from affecting control; available .375 - 12 in., cast iron or cast steel. Spence Engineering Co. WRITE IN NO. 215

Impact protection wall and corner guards, bumpers and handrails feature shock displacement dynamics; protect from push carts, mobile equipment, more; 12 ft aluminum channels allow easy installation; made of high-density, rigid PVC. Outwater Plastics WRITE IN NO. 216

HELI-CAL flexture helical coils feature flexing qualities that can compensate for angular, parallel or skewed misalignment; provide axial motion, constant velocity and smooth bearing loads; can be designed in wide range of materials, coil thickness and number of coils; physical properties enable coils to be used for a variety of applications; can be designed into couplings, universal joints and machined springs. Helical Products Co. Inc. WRITE IN NO. 221

Overhead door guard protects overhead doors from fork trucks and other traffic; designed with tubular steel sides and a wooden beam for the top of the guard; this beam can be easily replaced; designed to stop vehicle before contacting door; easily mounted to floor; painted safety yellow; can be designed to fit most size doors. T&S Equipment Co. WRITE IN NO. 222

Forged brass Series 40 valves replace all-plastic construction; use no-leak brass bodies in lab equipment and media analysis devices; 2-way normally closed or 3-way normally closed; exhaust to atmosphere or piped exhaust; use with air, inert gas, liquids; vacuum to 300 psi; 24-in. lead wires standard. Peter Paul Electronics WRITE IN NO. 223

Fiberglide^® self-lubricating bearings catalog; 18 pages; details the full line of designs including product specifications and diagrams; custom industrial bearings and related products for a variety of applications including construction, mining, packaging, aerospace and more. RBC Bearings WRITE IN NO. 224

30 UV cure wand system; low-cost, high-performance device for spot curing applications; offers up to 4 W/cm² of UV light at 320-410 nm; delivers fast cure cycles and tack-free surfaces for light cure adhesives; autoranging 60-265 VAC, 50-60 hz solid-state power supply, 50W metal halide lamp and liquid light guide (sold separately); typical cure area is .5 in. dia.; exposure cycle begins once foot switch is actuated; exposure time can be controlled manually or by a programmable timed mode. Henkel Loctite Corp. WRITE IN NO. 225

Barrier Rail^™ guardrails have lift-out rail feature for easy access to machinery areas; install along aisles, offices and storage areas; heavy- and standard-duty models in single, double and triple rail configurations; 6- x 6-in. structural steel tube posts; .5-in. thick welded base plates; 4, 6, 8, and 10 ft. rails standard. W.A. Schmidt, Inc. WRITE IN NO. 226

Complete line of Tuff Sealä threaded adapters address the various thread types used around the world; easily convert, or mate, 1 thread style with another; line also includes adapters with both internal and external threads that mate NPT with Metric (or ISO) and NPT with Pg fittings; adapters are machined aluminum with electroless-nickel plating for enhanced protection against corrosion, friction and contamination. Remke Industries Inc. WRITE IN NO. 227

Disposable sweatbands added to line of cooling products; available in 3 styles to suit all applications; designed to provide comfort to workers in excessive heat environments; can be worn under hard hats, welding helmets and sandblasting hoods; 8 5/8 in. long; absorbs excess perspiration; standard style is made of cellulose sponge, deluxe model offers reinforced material with fine porosity for even better absorption; clip-on model has handy clips for use with hard hats and suspension systems. Allegro Industries WRITE IN NO. 228

PK Paintstik industrial marker is ideal for temporarily marking hot steel coils without running, charring or discoloring; marks are completely removed during standard acid bath pickling process; unlike other metal markers, it allows users to mark very hot surfaces and eliminates the need to remove marks prior to plating or galvanizing; goes on smooth and dries instantly; 800-1200°F; highly visible bright white. LA-CO Industries, Inc./Markal Co. WRITE IN NO. 230

Color brochure is a comprehensive mini-catalog of compressors and equipment; 6 pages list size ranges for rotary screw and piston compressors, aftercoolers, dryers; various filters and drain traps; portables and oil-free. Kaeser Compressors WRITE IN NO. 229