PRODUCTS for PROFIT
By Staff -- Industrial Distribution, 10/1/2000
Family of 99.99% alumina oxide
Family of 99.99% alumina oxide ruby/sapphire balls available; suit optical and light-refractive applications such as lasers; available in precision grades up to Grade 10; are comparable in hardness to alumina ceramic; feature exceptional anti-corrosive properties, high surface smoothness, high thermal stability, chemical inertness, and are lubrication free; available in varying colors. Thomson Precision Ball Co.
Battery watering guns
Battery watering guns manufactured to automatically shut off when reaching the correct fill level; allow operators and maintenance personnel to keep their eyes and face away from acid and other battery hazards; provide a flow rate of over 2 gallons per minute; shoot a gentle flow of water into the cells; shut off immediately at the level you designate. Philadelphia Scientific
Compression limiters
Compression limiters protect plastic components of an assembly from compressive loads generated by the tightening of bolts; keep compressive stresses below the elastic limit of the plastic, preventing unwanted distortion and cracking; designed for standard bolt and screw dimensions. Spirol International Corp.
Poly knit gloves
Poly knit gloves protect foodservice workers' hands from daily exposure to temperature extremes, including sub-zero temperatures in freezers and high-temperature broilers in the kitchen; provide thermal protection and cotton-like comfort; available in 2 colors, white and orange. Wells Lamont Industry Group
Maxstar 140
Maxstar 140 is a DC Stick/TIG inverter that weighs 10 lbs.; has 5 to 140 amp range; appropriate for MRO, food processing, light industrial and do-it-yourself markets; includes 7.5-ft. power cord, 13-ft. stick electrode holder, a 10 ft. ground clamp, and a shoulder strap for carrying. Miller Electric Mfg. Co.
Tennant 8300 riding sweeper/ scrubber
Tennant 8300 riding sweeper/ scrubber is designed to hold up to 300 lbs. of debris; battery-powered; applications include manufacturing plants, food and beverage warehouses, airports and retail facilities; features a 10-in. main brush, an 8-in. re-directional cylinder, a 57-gal. solution tank and a 74-gal. recovery tank; has power steering, on-board diagnostics and an LCD system; an optional large-capacity 1000 amp/hour battery delivers maximum machine run-time. Tennant Co.
Safety brochure
Safety brochure features information about the Draeger Multiwarn II gas detector with built-in sampling pump and other Draeger Sensors, including the Infrared Sensor Technology; includes specifications, order information and listings of product accessories. Draeger Safety, Inc.
Servocell Tcompact
ServocellT compact and lightweight actuator is useful where a lightweight product and low energy consumption must be combined with reliability and low electromagnetic compatibility (EMC) emissions; provides up to 4 mm of movement and direct forces up to .5N; measures 43 mm L x 19 mm W x 11 mm deep; available in a choice of 230V AC, 50V AC, 12V DC or 2V DC power supplies; operating temperature ranges from -45°to 85°C (-49°to 185°F); custom-designed units are available. PBT, Ltd.
Fractional hp AC motors
Fractional hp AC motors designed for long life in inverter-driven applications; new PacesetterT motors use a 5-stage insulation system and are almost immune from harmful effects that can be induced by some inverter applications; line offers 5 models in 3 frame sizes (34, 42 and 48) from 1/8 to 3/4 hp; synchronous and non-synchronous versions come in 230V and 230/460V 3-phase ratings. Bodine Electric Co.
Safety posters
Safety posters get the message across with just the right touch; series of 4 posters are ideal for educating and reminding employees of all skill levels about proper hand tool usage; posters available with a 17-minute hand tool safety training video that gives basic tool information, proper tool maintenance, and information on specialty hand tools. Wright Tool Co.
Sanitizing foot mat
Sanitizing foot mat provides effective germ cleansing action for food processing, dairy and beverage plants; mats have thousands of pliable rubber tips to scrape contaminants from the bottom of footwear; rubber tips bend under pressure to immerse shoe soles in disinfectant solution; mat holds 1 gal. sanitizing solution; measures 24 x 32 in. The Supply Corp.
PEC12 and PEC16
PEC12 and PEC16 digital contacting encoders; 12 or 16 mm diameter; used primarily for level control, tuning and timer settings for a variety of electronic equipment; features include insulated shafts, 12 and 24 pulses and detent options; the PEC12 rotational life is 30,000 cycles and the PEC16 rotational life is 100,000 cycles; available with an optional momentary push switch. Bourns, Inc.
Contacts, contactors and contactor kits
Contacts, contactors and contactor kits for electric lift trucks; replacement items are available for General Electric, Albright, Cableform, H/B Prestolite, Hitachi and Square D; the quality meets or exceeds original OEM form, fit and function. Joseph Industries, Inc.
High-performance cutting tools
High-performance cutting tools in HSS, for normal machinable materials, and HSCo, for normal and difficult-to-machine materials; styles include screw machine length, jobber length, taper length, extra-length, taper shank, oil hole, CNC-Short, NC-Spotting, aircraft extension and PDA drills; available surface treatments are bright finish, VAP steam oxide, nitrided lands and TiN-coated. Talbot Holdings, Ltd.
Illustrated construction dictionary
Illustrated construction dictionary written for architects, contractors, building owners, facilities managers, insurance and real estate personnel, attorneys and others; 3 rd edition includes 19,000 terms and more than 1,200 illustrations; includes information on energy and environmental issues, legal and business terminology and regional and slang construction terms; a companion CD-ROM includes expanded definitions, larger graphics, links to an Internet home port and the CSI MasterFormatT numbers for hundreds of terms. R.S. Means Co., Inc.
C Series MGS helical
C Series MGS helical concentric food and beverage duty speed reducer; coated with a USDA epoxy, which incorporates stainless steel leafing pigment into the paint; shipped with enough Grade 5EP lubricant to mount in any horizontal output position; vertical-mount units available upon request; can be supplied with USDA-approved white epoxy and food-grade oil; the NEMA C-faced input flange has an O-ring between the reducer and the motor, with an easy-mount maintenance-free coupling. Stober Drives, Inc.
Microgage 1000R-remote
Microgage 1000R-remote measuring sensor suited for precise displacement measuring in restricted or confined areas; measures .001-in. displacements and can be enhanced to detect changes as small as .00001 in.; for measuring and alignment over long distances, the laser and receiver elements can be separated by as much as 40 ft.; the receiver has several mounting points and will fit into small machinery spaces; comes with a carrying case and mounting fixtures. PINPOINT Laser Systemsr
AirMATION multi-stage
AirMATION multi-stage progressive filtration system for containment of fine particulate and gas phase pollutants; the roll media is 83% efficient polyester and measures over 11 ft. of flat surface filtration area, which automatically indexes based on pressure differential; stage 2 is 90% high loft synthetic filter panel in front of a final particulate filter with efficiencies to HEPA grade; final stage is a gas phase dry process carbon composite cell; built-in sensors automatically monitor performance to indicate final filter replacement; airflow capacities range up to 3000 cfm. Biological Controls, Inc.
Endura grease interceptor
Endura grease interceptor designed to provide strength, durability and superior performance in the most demanding applications; features an inlet baffle design engineered to enhance grease separation; the outlet baffle removes up to 90% of the solids from the tank, allowing for increased time intervals between cleaning; manufactured in injection-molded, engineered thermoplastics; weighs less than 25 lbs.; the tank is molded in 1 piece and external reinforcing ribs provide rigidity and strength; available in 15 and 20 gpm models. Canplas, Inc.
658 series rotary valve
658 series rotary valve made of high-strength glass-reinforced polypropylene or PVC NSF conforming materials; features include a blowout-proof stem, 2-way flow and a smooth quarter turn handle; available sizes are 1/4-in NPT x 1/4-in. or 3/8-in. push to connect tube. The Specialty Mfg. Co.
ResbondT 989 3000°F,
ResbondT 989 3000°F, alumina adhesive protects heat sensors used in corrosive environments; cures at room temp.; applications include bonding and protecting thermocouples, heat sensors, and critical electronic components from moisture and humidity at elevated temperatures; packaged in quart-sized trial kits with datasheets, instructions and the Cotronics High Temperature Ceramics Handbook. Cotronics Corp.
Line of pin-lug couplings
Line of pin-lug couplings and hose menders; products are molded from nylon; lug couplings available in 1.5 to 4-in. sizes; hose menders are 1.5 and 2-in. sizes; applications include agriculture, construction and mining. Bee Valve Inc.
QuickTrapT 2-bolt
QuickTrapT 2-bolt stainless steel strainer connector enables steam trap replacement in minutes without disturbing the piping; can be installed in pipework of any angle orientation; recommended for use with TLV's patented FS3 (free float), patented FP32 (Thermodyne TM ) and patented FL32 (thermostatic) steam traps on steam main drainage, tracers and light process applications. TLV Corp.
ASME code PT tanks
ASME code PT tanks include 83Z Series Stainless Steel PT tank; ideal for waterborne coatings when used with a disposable tank liner; features a 300-grade stainless lid and all wetted parts in the lid assembly; has zinc plated tank shell; the 83C Series Zinc plated PT tank is ideal for solvent-based coatings and can be used with an optional disposable tank liner; boasts all zinc-plated parts; meets NFPA 33, ASME, and OSHA regulations for using flammable and combustible materials. Binks
CBN 100 and CBN 150
CBN 100 and CBN 150 are two PCBN (polycrystalline cubic boron nitride) products for finish machining of hardened ferrous materials; CBN 100 has a fine-grained structure and low (50%) PCBN content for excellent edge quality, ideal for light continuous cuts to moderate interruptions of hardened steels; CBN 150 has a sub-micron grain size and low (45%) PCBN content; suits finishing that involves aggressive interrupted cuts, or where machine stability is not optimal. Carboloy Inc.
Sigma green 4-1/2-in. grinding wheels
Sigma green 4-1/2-in. grinding wheels offered with a 5/8-11 throw-away adapter; allows quick mounting on right-angle grinders; feature a zirconia/ceramic grain and proprietary bonding; run smoothly and quietly for the extremely fast grinding of stainless steel welds without discoloration or warpage. Rex-Cut Products, Inc.
Sigma compressor lubricant
Sigma compressor lubricant is a semi-synthetic and synthetic fluid with a unique synthetic additive package; keeps air compressors running reliably and efficiently; meets stringent environmental regulations; designed for long life to reduce the frequency of oil changes; easily separates from condensate; minimizes disposal and maintenance costs; resists degradations while providing superior lubrication to ensure optimum performance. Kaeser Compressors
Red lithium complex power equipment grease
Red lithium complex power equipment grease is a premium lithium complex; carries an NLGI rating of GC-LB and a dropping point of & gt; 500°F; ensures maximum viscosity at high operational temperatures for industrial, automotive and commercial applications; features special additives that provide high film strength as well as protection against wear, oxidation and corrosion under the most demanding conditions; available in 14-oz. cartridges and 35-lb. pails. LubriMatic
View All Blogs
